Magnetic Roll Media for IColor 250 - Non Die Cut (4.75 in x 100 ft) (121mm x 30m) 1 pack

Price:

$75.00

Magnetic Roll Media for IColor 250 - Non Die Cut (4.75 in x 100 ft) (121mm x 30m) 1 pack. Magnetic Material is a smooth, bright white face sheet with a magnetic backing. This continuous stock material is used for digital die-cut magnets on the IColor 250. Note: The recommended starting knife pressure for the magnetic media is 22. This media is not meant to be cut all the way through because there is no liner. Instead, this knife pressure setting is meant to score the magnetic media so that it can be removed by hand after printing.



WARNING: WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. Specialty inks and film require a good humidity and temperature environment (55% - 75% humidity, and 75° to 80°F) to minimize risk of ink clogs and film buckling.